CLOSED
  • Model: ANI-MODZ


The ANI-MODZ Modular Matrix is designed to allow the switching and distribution of up to (32) source devices to up to (32) connected displays (model specific), either directly via a HDMI, DVI or CAT5e/6/7 outputs to compatible receivers, providing control options. (Dependent on module configuration)

Providing unparalleled levels of flexibility, with an advanced modular design, these models can be setup in a wide variety of combinations allowing users the ability to tailor the Matrix to their requirements by simply adding or removing the input or output modules as required.

The Modular Matrix is supplied with dual removable internal power supply units, which allow for easy inspection and maintenance. Also included is a DVI output for local monitoring of the output, allowing installers to easily monitor, test and configure the Inputs and Outputs on installation.

In addition, this matrix also features IP control allowing users to access and control the matrix remotely while also allowing additional options for integration of a third-party control system. This product has a 3 year warranty.

FEATURES

  • HDMI, HDCP 1.1 and DVI 1.0 compliant
  • Interchangeable input and output modules
  • Input and output module types can be mixed and added in multiples of (8) from 16x16 ((2) Input module, (2) Output module) up to 32x32 ((4) Input modules, (4) Output modules) with HDMI, DVI or CAT5e/6/7 connection types
  • Supports a wide range of PC and HDTV resolutions from VGA to WUXGA and 480i to 1080p@60Hz and 4K2K@24/25/30Hz
  • Supports pass-through of LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
  • Supports control of the matrix via front panel buttons, remote control, RS-232, Telnet and WebGUI controls
  • Supports (10) available preset settings
  • Supports (3) EDID Modes: Standard, Dynamic and Manual
  • Dual removable power supply units
  • DVI Monitor Port included
  • Supports HDMI cable input lengths for up to ~50 ft / 15M each way (1080p@60Hz 8bit resolution), ~33 ft / 10M (1080p@60Hz 12bit resolution) or ~17 ft / 5M (4K2K@30Hz resolution)
  • Supports CAT5e/6/7 cable output lengths for up to ~330 ft / 100M (1080p@60Hz 8bit/12bit resolution) or ~230 ft / 70M (4K2K@30Hz resolution) dependent on board capabilities
  • HDBaseT™ 5Play™ convergence supports UHD Video, HD Audio, PoC, Ethernet and IR/RS-232 Control
  • HDBaseT™ 4Play™ convergence supports HD Video, HD Audio, PoC and IR/RS-232 Control
  • HDBaseT™ 3Play™ convergence supports HD Video, HD Audio and IR/RS-232 Control

SPECIFICATION

  • Inputs: (16) to (32) HDMI (Uncompressed AV and Data)
    • (1) 9pin D-sub (RS-232 Data)
    • (1) RJ45 (IP Control)
    • (1) USB Mini B (SERVICE Propriety Data)
    • (1) 3.5mm Stereo mini-jack (RESERVED Infrared Receiver)
  • Outputs: up to (32) HDMI (Uncompressed AV and Data)
  • PSU: 110V/220V

INCLUDED

  • ANI-MODZ Modular Matrix Enclosure (including CPU Control Board and Removeable Dual Power Supplies)
  • (Optional) Input Module Boards - HDMI, CAT5e/6/7
  • (Optional) Output Module Boards - HDMI, DVI or CAT5e/6/7
  • IR Extender (included with Transmitter module only*)
  • IR Blaster (included with Receiver module only*)
  • Remote Control (ANI-127)
  • (2) Power Cords
  • Users Guide

*Both IR Blaster and IR Extender are NOT included with EACH module.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.