The ANI-QUAD-MINI HDMI Quad Screen Multiviewer allows you to simultaneously display real-time HDMI/DVI video from (4) different sources on a single monitor. It is capable of displaying the video sources in Quad, PiP or Full Screen modes. The audio/video output can be extended up to 250ft* away via a single CAT6/6a/7 cable. This product has a 3 year warranty.
FEATURES
- 4x1 Quad Multi-viewer and seamless switch with multiplexed HDMI (4) Inputs and (1) Output
- Supports up to 1080p High Definition resolution and is HDMI 1.3a and HDCP 1.2 compliant
- Supports scaler Up/Down functions and digital audio formats LPCM/AC3/DTS
- Control provided with front panel buttons, IR remote, RS-232 and various third party controllers
- IR system allows for control of the source at the display end
- Allows HDMI Audio/Video and IR signals to be transmitted over a single CAT5e/6 cable
- Quad, Picture in Picture and Full Screen display modes
- Quad Mode:
- In quad mode, the screen is split into (4) fields of equal size each displaying the entire contents of (4) different video sources
- Fluid, real-time video performance with 60 frames per second (fps) in all (4) quadrants
- Full Screen Mode:
- In full screen mode, (1) of the (4) video sources is displayed in full screen size at maximum resolution
- Picture in Picture (PIP) Mode:
- In PIP mode, the full screen display of (1) of the (4) video sources is accompanied by (3) small images (thumbnails) of the (3) other video sources on the right hand margin of the screen allowing simultaneous monitoring. Independent video in to video out resolution
- Supports HDTV resolutions up to 1080p and computer resolutions up to 1920x1200
- HDMI features supported:
- Inputs: 24, 30 and 36bit / xvYCC, sRGB and YCbCr
- Outputs: 24 and 30bit sRGB
- (4) channel non-mixing or (1) channel mixing stereo with 16, 20 or 24bit uncompressed PCM audio
- Bandwidth up to 165MHz
- Inputs: 2.25Gbps
- Output: 2.0625Gbps
- Switches audio independently from the video when connected to the HDMI sources in Quad mode
- Controls the multiviewer through front panel buttons, IR remote or Graphical User Interface (GUI) via RS-232
- Bi-directional IR control from multiviewer and remote unit locations
- Cascade multiviewers to display video from any number of video sources on (1) screen
- Each unit in the cascade must be configured and controlled individually
- Cascaded outputs can be extended using the remote unit as long as the combined total CAT6/6a/7 cable length is between all levels of the cascade, and does not exceed 250 ft
- Adjust output video brightness, contrast, color and sharpness
- Supports simultaneous local and remote HDMI output
- Features coax SPDIF audio outputs at the multiviewer and receiver
- Built-in default EDID table
- Supported output resolutions can be selected
- ARC (Audio Return Channel) support at the receiver unit via a coax SPDIF output for speakers
- Turn ARC on to play audio from a HDTV with ARC support, to the connected speakers
- Turn ARC off to play audio from the multiviewer source, to the connected speakers
- The ANI-QUAD-MINI is NOT compatible with EZ-45 connectors
SPECIFICATION
- Video Bandwidth: 2.25Gbps
- Input Ports:
- (4) HDMI (Female type)
- (1) 3.5mm port for IR receiver
- (1) RS-232
- Output Ports:
- (1) HDMI (Female type)
- (1) RCA
- (1) RJ45 connector for CATx cable to remote unit
- (1) UTP
- (1) coax connector for local SPDIF audio
- (4) 3.5mm ports for IR emitters
- Audio Output: PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1
- Input Resolution: 80i@60Hz,480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@24/30/50/60Hz, 800x600@60, 1024x768@60Hz, 1280x720@60Hz, 1920x1080@60Hz
- Output Resolution: 1080p, 1080i, 720p, 1024x768, 1360x768
- Control:
- Infrared Remote Control
- IR Control of the Multiviewer: Control with the included IR remote using the built-in IR receiver on the multiviewer or via an IR receiver connected to the remote unit
- IR Control of Connected Sources: Control with the source IR remote using the built-in IR receiver on the multiviewer or via an IR transmitter connected to the multiviewer and an IR receiver connected to the remote unit
- IR Control of Connected Display: Control the remote display with the display IR remote via the IR receiver on the multiviewer and an IR transmitter connected to the remote unit
- Front Panel Interface
- RS-232 Control
- ESD Protection: Human Body model:
- ±8kV (air-gap discharge)
- ±4kV (contact discharge)
- Power Supply: 12V 2.5A DC Power Adaptor (Main Unit) / 5V 1A DC Power Adaptor (Receiver Unit)
- Dimensions (WxDxH): 10.5 x 4.5 x 1.25 in
- Weight: 2.0 lb (Unit only) / 4.2 lb (Net)
- Chassis Material: Metal
- Silkscreen Color: Black
- Operating Temperature: 0°C~40°C/ 32°F~104°F
- Storage Temperature: -20°C~60°C/-4°F~140°F
- Relative Humidity: 20~90% RH (non-condensing)
- Power Consumption: 10W
| Cable |
Distance |
Max Resolution |
| CAT6 Standard UTP |
90 ft |
1080p/60Hz |
| CAT6 Solid UTP* |
125 ft |
1080p/60Hz |
| 250 ft |
1080i/60Hz or 720p/60Hz |
| CAT6a/7 Solid UTP/STP* |
250 ft |
1080p/60Hz |
INCLUDED
- ANI-QUAD-MINI HDMI Quad Multi-Viewer
- CAT5e/6 Receiver
- (2) Surface Mount brackets
- Remote Control
- (2) Wide-band IR Receivers
- (5) Wide-band IR Transmitters
- RS-232 Cable
- Power Supply:
- Base Unit: 12VDC@2.5A
- Receiver: 5VDC@1A Input: 110VAC (US/EU standards, CE/FCC/UL certified)
- Users Guide
- Optional Rack Mount Bracket (ANI-QUAD-MINI-RM)
- Works only with the ANI-QUAD-MINI and ANI-QUAD-LITE
- Includes screws and additional hardware to mount the ANI-QUAD-MINI into a standard 19in EIA rack
- 1RU 1-3/4" tall
- All black finish
- Rack Cabinet Screws NOT included
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
